These pumps are recommended for clean water and fluids
which are not chemically aggressive to the pump components.
THEY ARE MAINLY USED FOR CIVIL, INDUSTRIAL AND
AGRICULTURAL APPLICATIONS, WHERE THEY MAKE
THE MOST OF THEIR STURDINESS AND DEPENDABILITY.
They are manufactured to EN 733 - DIN 24255 standards.
Overall dimensions, sizes and positions of suction and delivery
openings, support feet and performance comply with these
standards. Their structural shape allows dismantling without
disconnecting the pump body from the pipeline (back pull out),
making them easy to use in widely varying conditions.
They should be installed in a covered area, protected against
weather.
PERFORMANCE RANGE
3 Flow rate up to 400 l/min (240m3/h)
Dynamic head up to 136 m
OPERATING LIMITS
Suction lift up to 7 m
Fluid temperature up to + 60
Maximum ambient temperature + 40
AISI 316 stainless steel motor shaft
mechanical seal with different materials
IP 55 protection
other voltages
60 Hz frequency
for higher temperature pumped liquids
for use in areas with a higher temperature
Max operating pressure 15 bar
STRUCTURAL CHARACTERISTICS
·PUMP BODY:cast iron, manufactured to
EN 733 - DIN 24255 and UNI 7467-NF E-44-111 standards,
built with flanged suction and delivery openings (UNI 2236 PN10).
·PUMP BODY COVER: cast iron which closes the rear pump body
and houses the mechanical seal.
·IMPELLER: Cast iron
·MOTOR SHAFT: AISI 304 stainless steel.
·MECHANICAL SEAL: ceramic and graphite.
·MOTOR:
the pumps are coupled to an asynchronous, high efficiency
USR induction motor of suitable size, which is quiet, closed
and externally ventilated, suitable for continuous duty. INSULATION class B.
Motors require an adequate external motor protector, and
connections are to be according to current standards.
·PROTECTION:
IP 44. WARRANTY: 2YEARS
(according to our general sales conditions). SPECIAL FEATURES ON REQUEST:
AISI 316 stainless steel motor shaft
mechanical seal with different materials
IP 55 protection
other voltages
60 Hz frequency
for higher temperature pumped liquids
for use in areas with a higher temperature
